Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Fox Island
If your chimney is leaking, smoking, or showing rust on the cap, you’re not imagining it. Fox Island sits in salt air and steady humidity, and that combination wears chimneys down faster than most of Puget Sound. We handle chimney repair in Fox Island, WA with your specific situation in mind: waterfront and bluff homes, wood heat that runs hard through the wet season, and older masonry that needs honest answers rather than a bigger bill. Our technicians have up to experience, and every recommendation we make is backed by camera footage you can see for yourself. Call (866) 942-7714. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Fox Island Homeowners Call Chimney Sweep Kent for Chimney Repair
Fox Island is a small island with a bridge, tidal currents, and a tight community that talks to its neighbors. Word travels, so we take the time to explain what we find instead of handing you a quote and a hard sell. Homeowners here call us because we do sweep, repair, and inspection under one roof, which means no hand-off to a second contractor halfway through a job.
We work with professional-grade brands the trade trusts – HeatShield for flue resurfacing, DuraFlex for full relining – and we don’t run to the big-box store for a cheap substitute. Our technicians have up to experience, and we can typically reach Fox Island for scheduled work without the runaround you get from a company crossing from the mainland and squeezing you in.
What sets the work apart is the evidence. On an island where the marine air is relentless, a chimney can look fine from the driveway and be failing inside the flue. We show you the photos and footage and let the repair tell you what the repair needs to be.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Crown Repair in Fox Island
Chimney Crown Repair is one of the most common jobs we do on Fox Island, and it usually starts with a crown that’s cracked, spalling, or pitted from years of salt air and driving rain. The crown is the concrete cap at the very top that sheds water away from the flue and masonry. When it fails, water runs straight down the inside of the chimney and into the smoke chamber, then rots the mortar and freezes in the brick. A typical crown repair or rebuild in Fox Island runs $450 – $1,200, depending on the size of the chimney and whether the job is a patching job or a full replacement.
Patching vs. Full Rebuild
Hairline cracks and minor surface spalling can often be patched with a proper mortar mix and a flexible sealant. If the crown has separated from the flue tile or broken into pieces, we rebuild it with a sloped contour so water runs off instead of pooling. We’ll tell you which one the damage calls for.
Waterproofing the Masonry Below
Once the crown is sound, a breathable waterproofing layer on the brick slows down the spalling that salt-laden air causes. We use products that let the masonry dry from the inside, because trapping moisture in a chimney is worse than leaving it open to the rain.
Chimney Repair Companies in Fox Island
Not every chimney repair company in Fox Island can actually do the work. Some sweep and hand off repairs to someone else. Some quote a full reline before they’ve ever run a camera down the flue, and that’s where the industry’s worst upselling happens. When we look at a chimney, we assess whether HeatShield resurfacing can restore a cracked clay-tile flue before we recommend the higher cost of a full DuraFlex reline. Most repair jobs in Fox Island fall into a wide range: a simple cap and mortar repair runs $300 – $800, while a full reline on a badly damaged flue can run $3,000 – $7,500.
What the Camera Shows
We run a Level 2 inspection with a video camera down the flue so you can see the cracked tiles, the mortar joints, and the state of the creosote. If we recommend work, the footage supports it. If the chimney can safely wait, we say so.
Matching the Fix to the Flue
Clay tile flues from older homes, undersized stacks venting modern stoves, and short masonry chimneys all need different solutions. We match the repair – a resurfaced liner, a rebuilt flue, or just a proper cap – to what’s actually in your chimney.
Trusted Brands We Service in Fox Island
We specify professional-grade materials – the same brands trusted across the chimney industry – because Island weather is hard on chimneys and big-box substitutes don’t hold up. HeatShield handles flue resurfacing without tearing out the existing liner in many cases, and DuraFlex stainless systems take over when a reline is truly needed. Gelco and Copperfield supply the caps and venting components that keep driven rain off the flue. We don’t claim to stock parts, but we can source the right component for your chimney’s configuration and get it installed without a long wait.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Fox Island Homes
- Spalling brick and mortar: The wet-dry-freeze cycle and salt in the air crumble the outer face of the chimney and open up the joints. Once the mortar is gone, water gets into the brick and the damage accelerates fast.
- Rusty caps and failed flashing: Metal caps pit and rust on wind-exposed shoreline and bluff lots faster than they would inland, and driven rain off the Sound pours past a poorly fitted cap straight into the flue.
- Cracked clay-tile liners: Thermal cycling and wind-driven rain crack the tiles that line older fireplaces, letting creosote and moisture reach the surrounding masonry. Sounding out the flue with a camera is the only reliable way to know.
- Undersized or unlined flues venting modern stoves: Many Fox Island homes have wood stoves added since the 1980s vented into stacks that were never designed for them. The result is poor draft and soft, acidic creosote that attacks the flue from the inside.
Pricing for Chimney Repair in Fox Island, WA
We don’t hide pricing behind a phone call. A typical crown repair in Fox Island runs $450 – $1,200, and a chimney cap replacement with fitting runs $300 – $600. Tuckpointing across a chimney face lands around $25 – $60 per square foot. A full DuraFlex reline on a badly damaged flue runs $3,000 – $7,500 depending on flue diameter and length, and HeatShield resurfacing often costs less than a reline where the liner can be saved. What moves the number is the size of the chimney, the extent of the spalling, and whether a camera inspection turns up hidden damage. The estimate is free, and the written estimate sets the final price.
We Also Serve Cities Near Fox Island
We work across the South Sound – from McChord AFB and Canterwood to Bethel and Algona. If you’re on the Gig Harbor peninsula or just off it, we can schedule chimney repair through Fox Island and the surrounding communities. Reach out if you need an assessment, a cap, a crown, or a liner. One call covers the job.
Serving Fox Island, WA – Our Local Coverage Area
We serve Fox Island and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Fox Island
You can’t reliably tell from the outside – third-degree creosote looks like a shiny, hardened glaze inside the flue and only a camera can confirm it. In Fox Island’s humid marine air, creosote can stay soft and acidic, which is exactly the condition that glazes and eats into the liner. Call (866) 942-7714 for an inspection – estimates are free.
Salt-laden marine air and near-constant humidity. On wind-exposed bluff and waterfront lots, caps and metal liners pit and rust noticeably faster than on inland Gig Harbor homes. That’s why we check the cap on every visit and specify professional-grade replacement materials instead of the cheapest stamping we can find. Call (866) 942-7714 for a cap estimate.
Not always. Surface spalling and hairline cracks can often be patched, while a separated or crumbling crown needs a full rebuild. The camera and a hands-on look tell us which one, and you’ll see the evidence before we quote the job. Call (866) 942-7714 – estimates are free.
A Level 2 inspection is a camera inspection that checks the flue interior, joints, and smoke chamber for cracks, deterioration, and creosote buildup, and it’s needed when you’ve had a chimney fire, added or changed an appliance, or moved into a home you don’t have a service history for. In Fox Island, given the salt air and wind-driven rain, we recommend one before your first burn of the season. Call (866) 942-7714 to book it.
We can once we’ve seen the flue. For flues where the existing clay tile can be restored, HeatShield resurfacing often saves the cost of a full reline; when the damage is beyond that, a DuraFlex stainless liner is the standard fix. We don’t recommend either without camera evidence you can see for yourself. Call (866) 942-7714 for a free estimate on your specific chimney.
Written by the team at Chimney Sweep Kent.