Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning & Sweep Cost in Kent?
A standard chimney cleaning and sweep in Kent typically costs $180 to $340 for a wood-burning fireplace, and most jobs fall near the middle of that range. Gas inserts and stoves usually run less, around $150 to $250, because there’s less creosote to remove. Add an inspection at the same visit and you’re generally looking at $325 to $525 for the combined work.
Those numbers assume a straightforward flue. A chimney with heavy creosote buildup, a stubborn cap, or a liner that needs attention will land at the top of the range or above it. We set the final price with a written estimate before any work starts, and the estimate itself is free. Call (866) 942-7714 to book one. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Standard sweep for a wood-burning fireplace in Kent: $180 to $340.
- Gas insert or stove cleaning: $150 to $250.
- Sweep plus inspection bundle: $325 to $525.
- Heavy third-degree creosote removal pushes a job above the standard range, sometimes past $500.
- Estimates are free, and the written estimate sets the final price.
- Our technicians have up to experience.
Chimney Cleaning & Sweep Cost Breakdown (2026)
Here’s how the numbers break out by line item for the Kent market this year. These are typical estimated ranges, not quotes. The written estimate you get on site is what counts.
| Service | Typical Estimated Range | What It Covers |
|---|---|---|
| Standard chimney sweep (wood-burning) | $180 – $340 | Flue brushing, firebox cleaning, damper and smoke shelf, debris removal |
| Gas insert or stove cleaning | $150 – $250 | Venting check, firebox clean, burner and log inspection |
| Sweep plus inspection | $325 – $525 | Full clean with a structural and safety assessment |
| Standalone chimney inspection | $175 – $325 | Structural, flue, cap, and venting assessment with a written report |
| Heavy creosote removal (third degree) | $400 – $700 | Extra labor and time for glazed, tar-like buildup |
| Chimney cap replacement | $250 – $600 | New cap and hardware, matched to your flue configuration |
| HeatShield flue resurfacing | $1,200 – $3,500 | Non-invasive liner repair for cracked or pitted flue tiles |
| DuraFlex full relining | $3,000 – $7,500 | Complete new stainless liner installation |
What pushes a job toward the top of a range: heavy creosote, a flue with more than one appliance tied in, a chimney that hasn’t been touched in several seasons, or a cap that’s seized or rusted shut. What brings it down: regular annual cleaning, a single fireplace on a straight flue, and easy access from the roof. A gas insert is the cheapest clean because there’s no soot or creosote to speak of, just dust and a venting check.
If the sweep turns up something structural – a cracked flue tile, a failing crown, a cap that needs replacing – we won’t guess at a repair price on the spot. We’ll document it, show you photos, and put the options in writing. In many cases, HeatShield resurfacing can restore a cracked flue for a fraction of what a full relining would cost, so we assess that first before recommending the bigger job.
What Affects Chimney Cleaning & Sweep Pricing in Kent
Kent sits in a part of Western Washington where homes are heated hard through long damp winters, and chimney condition reflects that. The factors below are the ones that move the price most for local homeowners.
- How much creosote has built up. A lightly used fireplace with a thin dusting of soot cleans out fast. Glazed, tar-like creosote that’s hardened to the flue walls takes much more time and often heavier equipment, which is the single biggest price driver on a sweep.
- Frequency of previous cleanings. Chimneys cleaned annually stay in the low end of the range because the buildup never gets a chance to harden. A fireplace that’s gone several seasons without a sweep usually costs more, and it’s also the situation where a flue inspection becomes necessary rather than optional.
- Fuel type. Wood-burning fireplaces produce creosote and need real brushing. Gas inserts and stoves produce far less residue, so a gas clean is quick and cheaper. Pellet stoves sit in between.
- Flue and liner condition. If the sweep turns up cracked tiles, gaps at the joints, or pitting, the job can grow from a clean into a liner repair. This is where using professional-grade materials matters: we specify HeatShield for resurfacing and DuraFlex for full relining, the same brands trusted by certified chimney institutes.
- Chimney access and configuration. A tall chimney on a steep roof, a cap that’s bolted down tight, or a flue with an offset takes longer than a short, straight run. Multiple flues in one stack add time per flue.
- Cap, damper, and venting components. A tired cap or a damper that won’t seal can add to the bill, but the right part matters. We lean on Gelco and Famco product knowledge to match caps, dampers, and venting components to the specific flue configuration, which cuts down on callbacks and warranty issues.
One thing that does not change the price: whether you call during a weekday or on a Sunday. We set the price per job by the written estimate, and nothing gets added for same-day scheduling.
How to Save on Chimney Cleaning & Sweep
There’s no shortcut around a real sweep, but there are sensible ways to keep the cost at the low end of the Kent range and avoid paying twice for the same problem.
- Book the annual clean before winter. Fall is when most homeowners think about their fireplace, and booking early gets you on the schedule without the crush. A chimney cleaned every year stays in the $180 to $340 band because buildup never hardens.
- Bundle the sweep with an inspection. A combined visit runs $325 to $525, which is less than paying for a separate sweep and a separate inspection. The inspection catches small problems before they become liner repairs.
- Burn dry, seasoned wood. Wet wood smolders and lays down more creosote. Dry wood burns hotter and cleaner, which means less buildup and an easier clean next time.
- Don’t skip small repairs. A $250 to $600 cap replacement now can head off water damage that turns into a $1,200 to $3,500 resurfacing job later. Fixing the cheap thing first is the real savings.
- Ask about resurfacing before relining. If your flue is cracked, ask whether HeatShield resurfacing can restore it instead of a full DuraFlex reline. Resurfacing often costs far less, and we assess that first before recommending the bigger job.
Estimates are free. Call (866) 942-7714 and we’ll talk through what your chimney likely needs before anyone comes out.
FAQs – Chimney Cleaning & Sweep Cost
How much does a chimney sweep cost in Kent?
A chimney sweep in Kent typically costs $180 to $340 for a wood-burning fireplace, and $150 to $250 for a gas insert or stove. Heavy creosote or a difficult flue can push it higher. Call (866) 942-7714 for a free estimate – the written quote sets the final price.
Is it cheaper to sweep a gas fireplace than a wood-burning one?
Yes, usually by $30 to $90. A gas insert or stove clean runs $150 to $250 versus $180 to $340 for wood, because gas produces far less soot and creosote. The work is mostly a venting check and a firebox clean. Call (866) 942-7714 to confirm what your setup needs.
How often should I have my chimney cleaned in Kent?
Once a year is the standard for a wood-burning fireplace that sees regular winter use, and that annual schedule keeps you at the low end of the $180 to $340 range. A gas insert can often go longer between cleanings but should still be checked. Call (866) 942-7714 to book a visit.
Why does heavy creosote cost more to remove?
Glazed third-degree creosote can run $400 to $700 to remove because it hardens to the flue walls and takes far more time and heavier equipment than a routine sweep. It’s also the buildup most tied to chimney fires. Call (866) 942-7714 for an assessment if your chimney hasn’t been cleaned in a while.
Can you clean and inspect my chimney on the same visit?
Yes, and a combined sweep and inspection usually costs $325 to $525, which is less than booking them separately. We offer inspection as a standalone service too, whether for an annual safety check, an insurance requirement, or a real estate transaction. Call (866) 942-7714 to schedule.
Is it cheaper to repair a cracked flue or replace the liner?
Repair is usually cheaper. HeatShield flue resurfacing runs an estimated $1,200 to $3,500 and can restore a cracked or pitted flue in many cases, versus $3,000 to $7,500 for a full DuraFlex reline. We assess resurfacing first before recommending a relining. Call (866) 942-7714 for an evaluation.
Why Homeowners in Kent Choose a Chimney Specialist
A chimney isn’t a place to bring in a generalist with a brush and hope for the best. We work exclusively on chimneys, and that shows in the way a job runs: sweep, inspection, and repair under the same company, with no hand-off to a second contractor mid-project. When the sweep turns up a problem, the person who finds it is the person who can fix it.
That matters for materials. We specify professional-grade brands – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – the same trusted across the chimney industry, not the big-box substitutes that fail early. Our technicians have up to experience, and we show you what we find: photos, a plain-language explanation, and your options, then you decide. No pressure, no scare tactics, just a clear picture of what your chimney needs.
We cover the full lifecycle of chimney care, from a routine annual clean to complex relining jobs that sweep-only companies refer out or can’t complete. If you live in or around the Kent area and want one team that can handle the whole job, we’re the call to make.
Book Your Chimney Cleaning in Kent
Whether you need a standard sweep, a full inspection, or a repair you’ve been putting off, we’re ready to take a look. Our chimney sweep Kent service starts with a free estimate and a clear written price before any work begins.
Call (866) 942-7714. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Same-day service is often available, and a clean, safe chimney is one phone call away.
Pricing reflects the Kent market as of 2026. Chimney Sweep Kent offers free estimates – call (866) 942-7714.
Written by the team at Chimney Sweep Kent.
What Our Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Colleen Whitaker"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Heather Hoffman"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Bryce Barrett