Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Kent, WA
We provide independent Gelco service across Kent, Washington. A cleaning visit here is rarely just a brushing job: the houses and the climate both put moisture into the chimney, and the one thing that sets our Gelco work in Kent apart is that every appointment includes checking the brick and flue for water damage, not just the firebox. Kent’s cool, damp winters and its older masonry chimneys give soot and creosote plenty of time to turn acidic against the flue, and Gelco inserts sit right in the middle of that.
We’re an independent shop that services Gelco wood-burning inserts, factory-built fireplaces, direct-vent gas inserts, and multi-flue cap assemblies. Call (866) 942-7714 for a free estimate.
Why Kent Residents Choose Us for Gelco Service
Gelco equipment shows up in a real cross-section of Kent homes: the mid-century ranches with wood-burning inserts set into brick, and the newer tract subdivisions where factory-built fireplaces and direct-vent gas inserts do the heating. Servicing that mix takes familiarity with how each kind fails, and we’ve built ours the practical way. Our technicians have up to experience, and the work is steady enough that the quirks of Gelco baffles, gaskets and dampers aren’t a surprise.
We work the full life cycle of a chimney. That means sweeping, inspection and repair from the same people, so a Gelco insert doesn’t get handed off to a second contractor halfway through a project. We specify professional-grade materials – DuraFlex, HeatShield, Olympia Chimney, Famco and Copperfield – and we choose parts that fit your flue, not whatever’s closest to the counter. When we quote a job, the price comes from a written estimate you can read before you decide.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Kent
Here’s what we find on Gelco equipment around Kent, and why it happens:
- Hardened door and glass gaskets on Gelco inserts. When a gasket hardens, the fire runs cold, and a cold fire deposits glazed creosote up the flue. Kent’s damp winters give that creosote the moisture it needs to turn corrosive, so the flue lining takes the damage along with the firebox door.
- Rusted or seized dampers and warped baffle plates. Factory-built Gelco fireplaces take on moisture over years of Puget Sound drizzle, and dampers that sit unused through summer seize by fall. We free them, or replace them if the metal’s gone.
- Corroded firebox panels and cracked refractory liners on Gelco inserts. This is where Kent’s clay soil and high water table matter. Moisture wicks up exterior brick chimneys and reaches the firebox from below. You’ll often see efflorescence and spalling brick at the base before the firebox itself shows failure.
- Failed multi-flue caps and loose mortar crowns. A cap that’s dropped, warped or lost a screen lets rain straight into the flue. That accelerates creosote corrosion and, in the worst cases, brings birds and debris down with the water.
- Glazed creosote from long slow fires. Wood-burning inserts run for hours on end in Kent through the wet months. A cold-running insert makes that creosote quicker than anything else, and once it’s glazed, standard brushing doesn’t move it.
Gelco Service in Kent: What Local Conditions Mean for Your Equipment
Kent’s clay soil and high winter water table push moisture up exterior brick chimneys from the foundation. That’s the local fact that shapes our Gelco work here more than anything else. In East Hill and Panther Lake, the 1960s and ’70s ranches have exterior brick chimneys that develop efflorescence – white salt staining on the brick face – from the wet winters. It’s a sign of moisture intrusion, and for a Gelco wood-burning insert set into that masonry chase, the trouble starts at the base and works inward. The brick wicks, the interior of the chase stays damp, and moisture reaches the firebox panels and refractory long before the firebox itself would ever fail from heat.
What that means for a cleaning visit: a qualified technician inspects the flue, sweeps the creosote, then walks the exterior base and checks for efflorescence and spalling. If we find them, we flag it early. Sealing and waterproofing the masonry before the brick spalls saves the chimney – and your Gelco insert with it.
Gelco Models & Products We Service in Kent
We service the kinds of Gelco equipment Kent homes actually have: wood-burning fireplace inserts, factory-built (prefab) metal fireplaces, direct-vent gas inserts, and multi-flue cap assemblies on masonry chimneys. Each brings its own points to check, from gaskets and baffles on inserts to damper operation and crown integrity on prefab fireplaces.
We’re an independent Gelco service provider, not manufacturer-affiliated or authorized. On parts, we use OEM Gelco components – gaskets, baffles, dampers, cap components – when they’re available for a correct fit. For consumables like gaskets and cap screens, quality aftermarket parts are fine.
We’re honest about repair versus replace. On a sound Gelco firebox, repair is usually right. On an aging insert with a rusted-through firebox or cracked refractory, replacement usually beats patching. Our full brand depth is on our Gelco page.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Kent
A standard Gelco sweep and inspection in Kent is typically estimated per job, with the final price set by the written estimate before we start. What drives the number: how much creosote is glazed versus loose, whether the insert needs pulling to reach the flue, whether we’re doing a Level 1 or Level 2 inspection, and whether the brick shows moisture damage that needs waterproofing. Repairs – gaskets, damper replacement, cap repair – get their own line items. The estimate is free, and it lists the scope so nothing surprises you partway through.
Call (866) 942-7714 for an exact quote. Estimates are free.
Serving Kent, WA – Our Local Coverage Area
We serve Kent and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Kent
Because the chimney is cold and damp, the flue can’t pull a draft until the fire warms it, and the smoke backs into the room. A hardened door gasket makes it worse. We check the gasket, damper and flue before recommending any repair. Call (866) 942-7714 for an exact quote – estimates are free.
Most routine annual checkups are Level 1, but a Level 2 is warranted after a chimney fire, a change of fuel, a real estate transaction, or if your installation is new to you. We recommend Level 2 on more Kent inserts than you’d guess, because the clay-tile flues in the older ranches often need a close look before we sweep.
Efflorescence. It’s salt drawn to the surface as moisture moves through brick, and in Kent’s wet winters it’s usually the first sign water is getting into the masonry. Left alone, it leads to spalling brick. We flag it during the inspection and explain whether waterproofing is the right next step.
Yes. Direct-vent Gelco gas inserts get their own inspection – venting, gaskets and the firebox – with the same care the wood inserts get. The service visit is built around what kind of insert you have. Call (866) 942-7714 for an exact quote.
Once a year for most homes, and more often if the insert is your main heat through the wet months. The exact interval depends on how much you burn and how the creosote builds. We inspect first, then recommend a schedule. Call (866) 942-7714 for an exact quote – estimates are free.
Service Areas Near Kent
We also serve homeowners in Maple Heights-Lake Desire, Lake Holm, Algona, Mirrormont and Alderton. If you’re just outside Kent, call and we’ll confirm coverage for your spot.
Book Your Gelco Service in Kent Today
Call (866) 942-7714 to book your Gelco service in Kent. We answer 24/7. Fast dispatch 7am-7pm, Sunday through Friday. The estimate is free, and the written price is set before we start. For more on how we cover the area, see our Kent page.
Written by the team at Chimney Sweep Kent.